DIPOXY-2K-700EXPERT up to 15cm Epoxy Resin and Hardener EP Laminating Clear Cast UV Wooden Table Base Aquarium Terra Construction…

SKU: DIPOXY-2K-700EXPERT_VA


Price on request



 


- DIPOXY-Crystal-Clear-Scratch-Resistant-Epoxy-Resin - 2K - DIPOXY-Crystal-Clear-Scratch-Resistant-Epoxy-Resin - 2K -

  Up to 15cm pour at once! 



DIPOXY-2K-700EXPERT is a crystal clear, low viscosity epoxy resin and is exclusive to us
manufactured and sold in "premium quality"! DIPOXY is ideal for almost
any application! For example: in jewelry, table making, so-called "River Table", for
Floors, pond, aquarium and terrarium construction, as well as for boat, ship and aircraft construction. Also
Molded parts can be poured into silicone molds, for example, or carbon, aramid and
Fiber optic connections are possible. Also ideally suited for model making! The best
Results are achieved with our effect pearl color pigments developed for epoxy resins!



The solvent-free DIPOXY-2K-700EXPERT is mixed in a ratio of 100: 45 (e.g. 100g A and 45g
B) units of mass (according to weight) are mixed and can therefore be easily processed. Ideally, the
Components A and B mixed at a temperature of 10 ° C - 25 ° C. Although it is basically self-venting,
for best results, however, care should be taken to use a maximum of 250 - 350 rpm. for about. 45 minutes
to stir until both components are well mixed!



DIPOXY-2K-700EXPERT was specially developed for thick film applications up to 15cm. It can be used for example
almost all "River Table" can be produced in one pour without any problems! The curing time is significantly longer than for
our DIPOXY-2K-700 and also that DIPOXY-2K-700PERbecause we make the exothermic reaction very strong
reduced in order to be able to achieve this extreme layer thickness! How high you can actually pour
always depends on the ambient temperature and how wide and long it is poured! E.g. 6cm high, 20cm -
25cm wide and 250cm long at a temperature of 15 ° C was a very successful attempt in one pour!
It is recommended to always make a test cast before finally placing the carefully prepared workpiece
must be disposed of!


Simply select the desired amount of epoxy resin and add it to the shopping cart. Then select the color pigments and also place them in the shopping cart.


(We also have many other effect pigments in the shop)


The best results are achieved with our effect pearl color pigments developed for epoxy resins!



 

 

! Danger !

As soon as both components are mixed, a chemical reaction occurs, in which heat slowly occurs

is released. Depending on how high the finished mixture is in a container, the heat may not be quick

enough to be discharged through the surface. If you don't process it immediately, the following rule always applies:

"Better to leave it wide and flat than tall and narrow!"

Depending on what you want to do, the following information from our experiments will help you.

You can of course also use more material!

All information is provided without warranty!


The rough rule for consumption is:

1kg = 1mm height per 1m² (1m x 1m)


Consumption quantities DIPOXY for floor coating (private and commercial):

Primer (mostly black, white or transparent)

0.4 - 0.6 kg per m² (0.4 - 0.6 mm per m²)

Color effect layer (middle layer)

1 - 3 kg per m² (1 - 3 mm per m²)

Sealing (final layer is not absolutely necessary)

1 - 2 kg per m² (1 - 2 mm per m²)

Consumption quantities Effect Pearl Pigment for floor coating (private and commercial):

Depending on how thin you want to apply, you need between 5g and 25g of the epoxy mass (by weight) of pigments per kg.



 

Consumption quantities DIPOXY-2K-700PER for casting projects (river table):

Primer (mostly transparent)

0.2 - 0.4 kg per m² (0.2 - 0.4 mm per m²)

 

Color effect layer (middle layer)

10-11 kg per m² (approx. 1 cm per m²)

Sealing (final layer is not absolutely necessary)

1 - 2 kg per m² (1 - 2 mm per m²)

Consumption quantities of effect pearl pigment for casting projects (river table): 

Depending on how transparent everything should be, you need between 0.5g and 15g of the epoxy mass (by weight) of pigments per kg.

 

Processing time / drip time: at 10 ° C approx. 8-20 hours.
at 20 ° C approx. 6-14 hours.
at 30 ° C approx. 4-10 hours.
over 30 ° C is possible, but without a time limit!


Final strength:
at 10 ° C at least 10-14 days for walking and 4 weeks for heavy exercise.
at 20 ° C at least 4-10 days for walking and 3 weeks for heavy exercise.
at 30 ° C at least 3-4 days for walking and 1-2 weeks for heavy exercise.

Storage:
1 year / ideally at 10-25 ° C, dry and protected from direct sunlight!

Hazard warnings:
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 can cause allergic reactions to your skin.
H411 ??Toxic to aquatic life with long lasting effects.

Safety instructions:
P261 Avoid breathing dust / smoke / gas / mist / vapor / aerosol.
Avoid the release of P273 into the environment.
P280 Wear protective gloves / eye protection / face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove any existing contact lenses if possible. Continue rinsing.
P321 Specific treatment (see on this label).
P501 Dispose of contents / container in accordance with local / regional / national /
international regulations.
EUH205 Contains epoxy constituents. Can cause allergic reactions.




If, contrary to expectations, you should have a problem or just want more information, just give us a call!

Our competent service staff will be happy to take care of your concerns and advise you professionally!


Where can I get an epoxy resin with this price / performance ratio?

Only with us!

Team photoBusiness hours:

Monday - Friday:

8:00 a.m. - 12:00 p.m. and 1:00 p.m. - 6:00 p.m.

Additional telephone information:

(limited)

Saturday & Sunday: 10:00 a.m. - 2:00 p.m.


VASA-Fit GmbH / Kinzigheimer Weg 115/63450 Hanau

Management: Sascha Katzenstein

HRB 94572

VAT number: DE265265705

We are legally obliged to provide the following information:

Online dispute resolution in accordance with Art. 14 para. 1 ODR-VO: The European Commission provides a platform for online dispute resolution (OS), which you can find under 

https://ec.europa.eu/consumers/odr/